Radar level gauge is one of the important detection equipment commonly used in industry, which can be used to monitor the liquid level in pipelines and containers, so as to ensure the safety and efficiency of industrial production. However, in actual application, water entering the radar level gauge will damage it and affect the accuracy of measurement.

The way to deal with water ingress in the radar level gauge is to first cut off the power supply in time. Liquid entering the radar level gauge will cause damage to the equipment. One of the important reasons is that the equipment cannot be powered off in time. Therefore, as soon as liquid is found in the equipment, the power should be cut off immediately. This stops the device from working and prevents further damage. Secondly, disassemble the equipment. If the equipment has been soaked in liquid, immediately disconnect the power supply and disassemble the equipment. During device disassembly, extreme care is required to avoid further damage to the device. Separate and clean the equipment parts to help remove the liquid, but do not use chemicals during cleaning to avoid secondary damage to the equipment. Then wait for the device to dry, after the liquid has been removed from the device, the device should be dried. This can be achieved by air drying, heating or blowing.

When purchasing radar liquid level gauges, enterprises need to choose equipment with good waterproof performance according to the actual situation, and take action as soon as possible to prevent liquid from entering the equipment. If liquid enters, it is necessary to immediately cut off the power supply, disassemble, clean and dry it to restore the normal operation of the equipment. At the same time, we need to always pay attention to the operation of the equipment and perform regular maintenance to ensure that the equipment can maintain the best operating condition and accuracy.

If you have related needs, please contact us by phone! 400-851-0898