14000
㎡
SELF-OWNED FACTORY
3800
individual
Domestic and foreign customers
75
individual
Exporting countries
100000
set
Cumulative shipment
PRODUCT INTRODUCTION
HCDAR-80S radar water level sensor
76 ~ 81GHz FMCW radar level sensor 4~20 mA radar water level transmitter
HCDAR-8X series radar level sensor is one kind of level measuring instrument which uses FMCW ( Frequency Modulated Continuous Wave ) special millimeter wave technology , the working frequency is 76-81Ghz. The signal output has options : 2 wires 4-20mA, 4 wires 4-20mA or RS485. The max range can reach 120m, and the blind zone of 8cm. The antenna beam angle is about 3°,the outstanding performance makes it is workable for the accurate measurement of liquids, solids, and powder materials.
HCDAR-81S 80G radar solid level sensor
-40~120℃ 4-20mA radar solid level sensor Beam Angle 3° 80G FMCW radar level sensor
HCDAR-8X series radar level sensor is one kind of level measuring instrument which uses FMCW ( Frequency Modulated Continuous Wave ) special millimeter wave technology , the working frequency is 76-81Ghz. The signal output has options : 2 wires 4-20mA, 4 wires 4-20mA or RS485. The max range can reach 120m, and the blind zone of 8cm. The antenna beam angle is about 3°,the outstanding performance makes it is workable for the accurate measurement of liquids, solids, and powder materials.
HCDAR-63 Solid radar level sensor
0-70 m 26GHZ high frequency radar level sensor -40~350 ℃ Powder bin radar level transmitter
This series of HCDAR-6X adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 70 meters. Antenna is optimized further processing, the new microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.
HCDAR-61 Corrosion resistant liquid level transmitter
26GHZ 4~20mA Corrosion resistant liquid level transmitter -0.1~0.3 MPa 0-20m radar level sensor
This series of HCDAR-6X adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 70 meters. Antenna is optimized further processing, the new microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.
HCUS-300 Ultrasonic water level sensor
0-20m rs485 water ultrasonic tank level sensor 0.25%-1.0% Ultrasonic liquid level transmitter
Ultrasonic level transmitter is a non-contact, high reliability, cost-effective, easy to install and maintain level measurement instrument. It is a low-cost measuring device for measuring liquids, slurries and solids at industrial sites. It is widely used in water treatment, municipal, chemical, metallurgical and mechanical manufacturing industries.
HCUS-400 ultrasonic liquid level sensor
IP68 0.5%-1.0% 4-20Ma Ultrasonic Water Level meter Ultrasonic liquid Level sensor
Ultrasonic level transmitter is a non-contact, high reliability, cost-effective, easy to install and maintain level measurement instrument. It is a low-cost measuring device for measuring liquids, slurries and solids at industrial sites. It is widely used in water treatment, municipal, chemical, metallurgical and mechanical manufacturing industries.
HCUS-500 Explosion-proof ultrasonic liquid level sensor
Explosion-proof IP68 0-20m Ultrasonic liquid level transmitter
Ultrasonic level transmitter is a non-contact, high reliability, cost-effective, easy to install and maintain level measurement instrument. It is a low-cost measuring device for measuring liquids, slurries and solids at industrial sites. It is widely used in water treatment, municipal, chemical, metallurgical and mechanical manufacturing industries.
HCDB-30 Submersible Hydrostatic Liquid Transmitter
-20~85℃ 0-350m Submersible Hydrostatic Liquid Transmitter Stainless Steel 304 24VDC Hydrostatic water level Transmitter
The input level gauge is based on the principle that the measured hydrostatic pressure is proportional to the height of the liquid. The pressure sensor is used to convert the pressure signal into an electrical signal, which is converted into a standard current signal or digital signal after temperature compensation and linear calibration.
High quality cable with air duct; can be displayed on site; two sensors are available for multiple applications. The imported silicon piezoresistive sensor has high precision and good stability; the ceramic sensor has large hole design, anti-blocking and anti-corrosion; it is directly put into the liquid to be tested, and the installation is simple;
Input-type liquid level meter is suitable for urban water supply and sewage treatment, water conservancy and hydropower monitoring and control, marine and marine systems, chemical, medical equipment, industrial on-site liquid level measurement and control, water supply and drainage, environmental protection systems and various industries. Static pressure level measurement of a variety of media.
HCDP-30 Differential Pressure Transmitter
LCD 4-20ma output 0.1%,0.2% accuracy water oil differential pressure transmitter sensor
HDCP series Intelligent Differential Pressure Transmitter is a high performance pressure transmitter with the world-leading technology, developed with international advanced monocrystal silicon pressure sensor and patented packaging process. It adopts the patented double overload protection diaphragm design and internal circuit surge protection design, which could measure the gauge pressure, absolute pressure, flow rate, liquid level and density accurately. Designed by high level of integration and modularized circuit technology, achieves the functions of remote transmission, local zero, full range adjustment.
So it could be used in the process control fields of petroleum, chemical, metallurgy, electric power, food, papermaking, medicine, machinery manufacturing, scientific experiment and aviation military industries.
HCDP-10 simple type Pressure Transmitter
lcd screen display simple type Pressure transmitter 0.25% 40~105 degree centigrade pressure transmitter
Pressure transmitter adopts the imported silicon piezoresistive sensor as the pressure measuring element, which is divided into simple type, sanitary type and industrial type.
The simple type pressure transmitter has Hirschman joint type and integrated cable type, both use single chip scheme. This chip is the special signal conditioning chip of pressure transmitter with high integration, high precision and good stability. 1 wire digital communication calibration , no potentiometer.
The sanitary type pressure transmitter planar diaphragm design solves the problem of common pressure transmitters which is unable to clean the dirt and impurities on pressure leading holes. It adopts the advanced temperature compensation and nonlinear correction technologies, so it is particularly suitable for the applications of food and pharmaceutical industries where request high level sanitary conditions.
The industrial pressure transmitter adopts high performance 24-bit AD converter, with backlight LCD , HART or RS485 communication as optional, and three buttons on keyboard to fulfill the adjustment easily.
HCDB-50 Display Hydrostatic Level Transmitter
0-350m 4-20mA 24VDC Display submersible hydrostatic level transmitter
The input level gauge is based on the principle that the measured hydrostatic pressure is proportional to the height of the liquid. The pressure sensor is used to convert the pressure signal into an electrical signal, which is converted into a standard current signal or digital signal after temperature compensation and linear calibration.
High quality cable with air duct; can be displayed on site; two sensors are available for multiple applications. The imported silicon piezoresistive sensor has high precision and good stability; the ceramic sensor has large hole design, anti-blocking and anti-corrosion; it is directly put into the liquid to be tested, and the installation is simple;
Input-type liquid level meter is suitable for urban water supply and sewage treatment, water conservancy and hydropower monitoring and control, marine and marine systems, chemical, medical equipment, industrial on-site liquid level measurement and control, water supply and drainage, environmental protection systems and various industries. Static pressure level measurement of a variety of media.
HCDN-501 RF Admittance Level Transmitter
0.1~2MPa RF admittance level Transmitter 10PF~5000PF 4-20mA 24VDC capacitance level sensor
The RF admittance level Transmitter is a continuous level measurement product based on the principle of RF admittance. The product has the advantages of good stability, high sensitivity and wide application range. It is developed on the basis of the traditional capacitive level meter and can be widely used in the continuous measurement of various liquid and solid level in petroleum, chemical, metallurgy, medicine, electric power, food, paper and other industrial fields. Especially in the environment of high temperature, strong corrosion, strong adhesion, and dust.
HCDN-502 RF Admittance Level Transmitter
The RF admittance level Transmitter is a continuous level measurement product based on the principle of RF admittance. The product has the advantages of good stability, high sensitivity and wide application range. It is developed on the basis of the traditional capacitive level meter and can be widely used in the continuous measurement of various liquid and solid level in petroleum, chemical, metallurgy, medicine, electric power, food, paper and other industrial fields. Especially in the environment of high temperature, strong corrosion, strong adhesion, and dust.
HCDN-503 RF Admittance Level Transmitter
The RF admittance level Transmitter is a continuous level measurement product based on the principle of RF admittance. The product has the advantages of good stability, high sensitivity and wide application range. It is developed on the basis of the traditional capacitive level meter and can be widely used in the continuous measurement of various liquid and solid level in petroleum, chemical, metallurgy, medicine, electric power, food, paper and other industrial fields. Especially in the environment of high temperature, strong corrosion, strong adhesion, and dust.
HCDN-504 RF Admittance Level Transmitter
The RF admittance level Transmitter is a continuous level measurement product based on the principle of RF admittance. The product has the advantages of good stability, high sensitivity and wide application range. It is developed on the basis of the traditional capacitive level meter and can be widely used in the continuous measurement of various liquid and solid level in petroleum, chemical, metallurgy, medicine, electric power, food, paper and other industrial fields. Especially in the environment of high temperature, strong corrosion, strong adhesion, and dust.
APPLICATION
CERTIFICATE
OUR ADVANTAGE : OEM&ODM
HCCK provides professional OEM/ODM services, follow higher standard for quality control,powerful production guarantee lead time within several days for orders even hundreds quantity demand. In modern industrial production, environmental protection, hydrological monitoring, object level, pressure, temperature and other measurements have an important position and role. In the industrial automation system,the measurement data can ensure the safe operation , prevent accidents, as well as improving the automation and further boost efficiency.
SALES NETWORK
In the world>
In China>
HCCK agent position is waiting for you!
Up to now, the series of HCCK products have been widely applied to metallurgy, electric power, water conservancy, medicine, steel, chemical, mining, cement, construction, petroleum, environmental protection and many other industries. The products have been distributed in 30 provinces and autonomous regions within China , and have been exported to the US, Russia, UAE, UK, India, Brazil, South Korea, Malaysia, Singapore, Romania and other 75 countries and regions all around the world.>
HCCK agent position is waiting for you!
Up to now, the series of HCCK products have been widely applied to metallurgy, electric power, water conservancy, medicine, steel, chemical, mining, cement, construction, petroleum, environmental protection and many other industries. The products have been distributed in 30 provinces and autonomous regions within China , and have been exported to the US, Russia, UAE, UK, India, Brazil, South Korea, Malaysia, Singapore, Romania and other 75 countries and regions all around the world.
WhatsApp 173-6757-2262
South of Puhui Street, west of Guangsheng East Road, High tech Zone, Fengnan District, Tangshan City, Hebei Province
Technical support: PanGu
Tips
Submitted successfully
Determine
Tips
Submitted successfully
Determine